KAIWEETS AC - Voltage Tester
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

KAIWEETS AC - Voltage Tester

Available: In Stock
€16,99

Brand: Kaiweets

Characteristics: 

  • INSPECT WITHOUT CONTACT: Simply place the tip near a terminal block, outlet, or power cord. If the tip glows red and the pen beeps, you know voltage is on. Handy circuit tester and continuity tester for electricians, homeowners.
  • Triple volt alarm: With acoustic and visual signal as well as bars on the screen when voltage is present. Up to 8 bar graphs on the HD LCD screen for easy interpretation / viewing. The acoustic voltage indicator beeps at a higher frequency the higher the measured voltage is or the closer the voltage source is. The screen will light up red or green to distinguish Live / Null Wire.
  • ADJUSTABLE SENSITIVITY: Standard and low voltage (12-1000 V AC / 48-1000 V AC). Press the S button to adjust the sensitivity and adjust the low range for doorbells, thermostats, irrigation cables, etc.
  • SAFETY: IEC CAT III 1000V, CAT IV 600V / double insulation / high voltage alarm for voltages above 90V - the screen will turn red and the safety symbol on the screen will illuminate.
  • Bright LED flashlight / low-power display when the battery voltage is below 2.5V / automatic switch-off after 3 minutes without operation or signal recognition / portable pen hook. 3 years product guarantee. Ask? We are at your disposal.

    Details: Important operating instructions. Power On / Off: Hold the red button for 2 seconds to turn the checker on / off. Flashlight: When switched on, press the green button for two seconds to turn the LED light on / off. Press and hold the green button again to turn off the LED light S Button: Press the green button, the green button will light up, then switch to high sensitivity mode and press again to turn off this mode. A battery icon appears in the upper right corner when the battery is low. You should replace the battery in time. Live and zero wire testing If the test pen is near the plug, the tester gives an alarm sound with high frequency off and the screen flashes red to indicate that the line is under voltage. When a slow buzzer sounds, the indicator flashes green indicating that it is a zero line. When the live line is tested and the voltage is over 90V, the screen will turn red.

    Specifications: AC voltage range: 48V-1000V / 12V-1000V Frequency: 50 Hz / 60 Hz. Operating temperature: 0-40 ° C Storage temperature: -10-50 ° C Operating height: <2000 m Safety compliance: CAT III 1000 V, CAT IV 600 V, CE Product guarantee: 36 months.

    Package dimensions: 6.3 x 1.3 x 1.1 inches

    Brand: Kaiweets

    Characteristics: 

    • INSPECT WITHOUT CONTACT: Simply place the tip near a terminal block, outlet, or power cord. If the tip glows red and the pen beeps, you know voltage is on. Handy circuit tester and continuity tester for electricians, homeowners.
    • Triple volt alarm: With acoustic and visual signal as well as bars on the screen when voltage is present. Up to 8 bar graphs on the HD LCD screen for easy interpretation / viewing. The acoustic voltage indicator beeps at a higher frequency the higher the measured voltage is or the closer the voltage source is. The screen will light up red or green to distinguish Live / Null Wire.
    • ADJUSTABLE SENSITIVITY: Standard and low voltage (12-1000 V AC / 48-1000 V AC). Press the S button to adjust the sensitivity and adjust the low range for doorbells, thermostats, irrigation cables, etc.
    • SAFETY: IEC CAT III 1000V, CAT IV 600V / double insulation / high voltage alarm for voltages above 90V - the screen will turn red and the safety symbol on the screen will illuminate.
    • Bright LED flashlight / low-power display when the battery voltage is below 2.5V / automatic switch-off after 3 minutes without operation or signal recognition / portable pen hook. 3 years product guarantee. Ask? We are at your disposal.

      Details: Important operating instructions. Power On / Off: Hold the red button for 2 seconds to turn the checker on / off. Flashlight: When switched on, press the green button for two seconds to turn the LED light on / off. Press and hold the green button again to turn off the LED light S Button: Press the green button, the green button will light up, then switch to high sensitivity mode and press again to turn off this mode. A battery icon appears in the upper right corner when the battery is low. You should replace the battery in time. Live and zero wire testing If the test pen is near the plug, the tester gives an alarm sound with high frequency off and the screen flashes red to indicate that the line is under voltage. When a slow buzzer sounds, the indicator flashes green indicating that it is a zero line. When the live line is tested and the voltage is over 90V, the screen will turn red.

      Specifications: AC voltage range: 48V-1000V / 12V-1000V Frequency: 50 Hz / 60 Hz. Operating temperature: 0-40 ° C Storage temperature: -10-50 ° C Operating height: <2000 m Safety compliance: CAT III 1000 V, CAT IV 600 V, CE Product guarantee: 36 months.

      Package dimensions: 6.3 x 1.3 x 1.1 inches