Applent AT5220 - AC Low Ohmmeter Battery Internal Resistance Meter LCD
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Applent AT5220 - AC Low Ohmmeter Battery Internal Resistance Meter LCD

Available: Out of Stock
€5.103,93

Brand: Applent Instruments

Multimeter Properties:

  • Apply the vector method and measure several parameters at the same time
  • Comparator function (sorting)
  • Detection of a damaged test wire
  • Compatible with SCPI

Features

  • Adopt vector method and measure multi parameter silmutaneously
  • Comparator(sorting) function
  • Detection of damage test wire
  • Compatible with SCPI
  • Brand-new improved sampling circuit
  • Application
  • All kinds of contact resistance measurement
  • Li-battery, alkaline cell and lead accumulator determination of degradation and evaluation of lifetime
  • UPS test online and lead accumulator factory inspection
  • ESR test of super capacitor

 

  • Test parameters 20 AC resistance, 20 DC voltage
  • Basic accuracy Resistance: 0.5% Voltage: 0.05%
  • Measuring range Resistance: 0.01mΩ~33.000Ω Voltage: 0.00001V~60.000VDC
  • Signal source AC 1kHz, test current: <;150mA
  • Range three range automatic and manual
  • Test speed Fast 20 channels / 2 seconds, medium speed 20 channels / 4 seconds, slow speed 20 channels / 6 seconds
  • Display results Direct reading, ΔABS, Δ%, θ, sorting results
  • Maximum reading resistance: 30000 voltage: 60,000
  • Correction Full-scale short-circuit clear
  • Comparator RHI/RNG/RLO Output VHI/VNG/VLO Output Absolute Tolerance±TOL Sorting Percentage ToleranceTOL Sorting Order Comparison Sorting
  • Trigger Internal trigger, manual trigger, external trigger and remote trigger
  • Interface RS-232C interface Handler interface (PLC interface)
  • Power requirements Voltage: 195VAC ~ 245VAC Frequency: 50Hz Power: up to 15VA
  • Dimensions and weights Outer dimensions (mm): 264 (width) x 107 (height) x 350 (deep) Weight: 4kg
  • Accessories ATL505 Kelvin test line, ATL108 RS232 interface cable
  • Other test line damage detection true color TFT-LCD display, keyboard lock and data retention function internal flash memory and U disk data record
    AT5210 is a brand-new design DC resistance meter with high precision and high stability, which adopts high-performance 32dgt ARM micro processor to control. 3.5 inches true-color LCD Chinese and English display and it is easy to operate. It is high performance and intelligent instruments which is widely applied to UPS online batteries measurement,test contact resistance, battery voltage and battery internal resistance. Resistance testing uses vector test philosophy and voltage testing adopts difference test philosophy so as to accurately test open-circuit voltage and internal resistance. Can avoid the error resulted in pyroelectricity. The sorting and beep settings apply to automation production line test. The USB interface is used to remote control and data acquisition and analysis and suitable for the volume production of batteries.

    Brand: Applent Instruments

    Multimeter Properties:

    • Apply the vector method and measure several parameters at the same time
    • Comparator function (sorting)
    • Detection of a damaged test wire
    • Compatible with SCPI

    Features

    • Adopt vector method and measure multi parameter silmutaneously
    • Comparator(sorting) function
    • Detection of damage test wire
    • Compatible with SCPI
    • Brand-new improved sampling circuit
    • Application
    • All kinds of contact resistance measurement
    • Li-battery, alkaline cell and lead accumulator determination of degradation and evaluation of lifetime
    • UPS test online and lead accumulator factory inspection
    • ESR test of super capacitor

     

    • Test parameters 20 AC resistance, 20 DC voltage
    • Basic accuracy Resistance: 0.5% Voltage: 0.05%
    • Measuring range Resistance: 0.01mΩ~33.000Ω Voltage: 0.00001V~60.000VDC
    • Signal source AC 1kHz, test current: <;150mA
    • Range three range automatic and manual
    • Test speed Fast 20 channels / 2 seconds, medium speed 20 channels / 4 seconds, slow speed 20 channels / 6 seconds
    • Display results Direct reading, ΔABS, Δ%, θ, sorting results
    • Maximum reading resistance: 30000 voltage: 60,000
    • Correction Full-scale short-circuit clear
    • Comparator RHI/RNG/RLO Output VHI/VNG/VLO Output Absolute Tolerance±TOL Sorting Percentage ToleranceTOL Sorting Order Comparison Sorting
    • Trigger Internal trigger, manual trigger, external trigger and remote trigger
    • Interface RS-232C interface Handler interface (PLC interface)
    • Power requirements Voltage: 195VAC ~ 245VAC Frequency: 50Hz Power: up to 15VA
    • Dimensions and weights Outer dimensions (mm): 264 (width) x 107 (height) x 350 (deep) Weight: 4kg
    • Accessories ATL505 Kelvin test line, ATL108 RS232 interface cable
    • Other test line damage detection true color TFT-LCD display, keyboard lock and data retention function internal flash memory and U disk data record
      AT5210 is a brand-new design DC resistance meter with high precision and high stability, which adopts high-performance 32dgt ARM micro processor to control. 3.5 inches true-color LCD Chinese and English display and it is easy to operate. It is high performance and intelligent instruments which is widely applied to UPS online batteries measurement,test contact resistance, battery voltage and battery internal resistance. Resistance testing uses vector test philosophy and voltage testing adopts difference test philosophy so as to accurately test open-circuit voltage and internal resistance. Can avoid the error resulted in pyroelectricity. The sorting and beep settings apply to automation production line test. The USB interface is used to remote control and data acquisition and analysis and suitable for the volume production of batteries.