GEDORE ETP 15 - Electronic torsion tester 0.5-15 Nm | 1/4 "
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
-43%
GEDORE ETP 15 - Electronic torsion tester  1

GEDORE ETP 15 - Electronic torsion tester 0.5-15 Nm | 1/4 "

Available: In Stock
€2.604,01 €4.639,81

Brand: Gedore

Color: Grey

Properties:

  • For calibration and certification of torque wrenches
  • The software guides you through the calibration based on DIN EN ISO 6789: 2003 complete documentation of the creation of factory certificates
  • Manufacturer service for recalibration for short downtimes
  • Made in GERMANY

Binding: Tool

Release Date: 17-03-2017

Details: 

  • For testing, adjusting and certifying right-hand and left-hand torque wrenches
  • 5 models in the range from 0.5 to 3150 N · m
  • Vertical or horizontal testing in accordance with DIN EN ISO 6789
  • Electronic test device with integrated measuring electronics
  • Stable base housing made of cast aluminum (except ETP 3150) with  separate or removable control display
  • RS232 serial interface for PC
  • Can be traced back to national standards
  • ETP 15 with overload protection and tool for manual reset after unwanted overload Torque reading accuracy +/- 1%, +/- 1 digit from the reading value
  • Factory certificate in Based on VDI 2646
  • Optional certificate according to DAkkS-DKD-R 3-8
  • Large LC graphic display
  • Large measuring range in N · m, switchable to cN · m, lbf · ft or lbf · in (depending on model)
  • Power supply unit with Euro Plug (UK, US, AUS adapter on request)
  • Scope of delivery: operating display, display holder incl. Cable, software incl. PC connection cable

Package dimensions: 16.0 x 12.4 x 9.1 inches

Gedore ETP 15 Electronic torsion test device 0.5-15 Nm, 1/4"
For testing, and verifying clockwise and counter-clockwise torque wrenches in the range of 0.5 to 15 Nm (0.4 - 11 ft-lbs)
Vertical and horizontal testing according to DIN EN SIO 6789
Electronic torque tester integrated with measurement electronics
Robust housing from aluminum cast with separate or detachable operating display
Serial interface RS232 for PC
Traceable to national standards
With integrated overload protection and tool for manual restting after unintended overload
Torque reading precision +/- 1 %, +/- 1 digit from reading figure
Factory certificate based on VDI 2646
Optional certificate as per DAkkS-DKD-R 3-8
A large LC graphic display
Can easily switch from metric to imperial
Power supply unit with EURO plug
Accessories: Operating display, display holder including cable, software including connection cable for PC

Brand: Gedore

Color: Grey

Properties:

  • For calibration and certification of torque wrenches
  • The software guides you through the calibration based on DIN EN ISO 6789: 2003 complete documentation of the creation of factory certificates
  • Manufacturer service for recalibration for short downtimes
  • Made in GERMANY

Binding: Tool

Release Date: 17-03-2017

Details: 

  • For testing, adjusting and certifying right-hand and left-hand torque wrenches
  • 5 models in the range from 0.5 to 3150 N · m
  • Vertical or horizontal testing in accordance with DIN EN ISO 6789
  • Electronic test device with integrated measuring electronics
  • Stable base housing made of cast aluminum (except ETP 3150) with  separate or removable control display
  • RS232 serial interface for PC
  • Can be traced back to national standards
  • ETP 15 with overload protection and tool for manual reset after unwanted overload Torque reading accuracy +/- 1%, +/- 1 digit from the reading value
  • Factory certificate in Based on VDI 2646
  • Optional certificate according to DAkkS-DKD-R 3-8
  • Large LC graphic display
  • Large measuring range in N · m, switchable to cN · m, lbf · ft or lbf · in (depending on model)
  • Power supply unit with Euro Plug (UK, US, AUS adapter on request)
  • Scope of delivery: operating display, display holder incl. Cable, software incl. PC connection cable

Package dimensions: 16.0 x 12.4 x 9.1 inches

Gedore ETP 15 Electronic torsion test device 0.5-15 Nm, 1/4"
For testing, and verifying clockwise and counter-clockwise torque wrenches in the range of 0.5 to 15 Nm (0.4 - 11 ft-lbs)
Vertical and horizontal testing according to DIN EN SIO 6789
Electronic torque tester integrated with measurement electronics
Robust housing from aluminum cast with separate or detachable operating display
Serial interface RS232 for PC
Traceable to national standards
With integrated overload protection and tool for manual restting after unintended overload
Torque reading precision +/- 1 %, +/- 1 digit from reading figure
Factory certificate based on VDI 2646
Optional certificate as per DAkkS-DKD-R 3-8
A large LC graphic display
Can easily switch from metric to imperial
Power supply unit with EURO plug
Accessories: Operating display, display holder including cable, software including connection cable for PC