GEDORE ETP 500 - Electronic Torsion Tester 20-500 Nm | 3/4 "
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

GEDORE ETP 500 - Electronic Torsion Tester 20-500 Nm | 3/4 "

Available: In Stock
€3.919,00

Brand: Gedore

Properties:

  • For calibration and certification of torque wrenches
  • The software guides you through the calibration based on DIN EN ISO 6789: 2003
    complete documentation of the creation of factory certificates
  • Manufacturer service for recalibration for short downtimes
  • Made in GERMANY

Binding: Tool

Release date: 17-03-2017

Details:

  • For testing, adjusting and certifying right-hand and left-hand torque wrenches
  • 5 models in the range from 0.5 to 3150 N · m 
  • Vertical or horizontal testing in accordance with DIN EN ISO 6789
  • Electronic test device with integrated measuring electronics
  • Stable base housing made of cast aluminum (except ETP 3150) with separate or removable operating display
  • RS232 serial interface for PC
  • Can be traced back to national standards
  • ETP 15 with overload protection and tool for manual reset after unwanted overload
  • Torque reading accuracy +/- 1%, +/- 1 digit of the reading value
  • Works certificate based on VDI 2646 • Optional certificate according to DAkkS-DKD-R 3-8
  • Large LC graphic display • Large measuring range in N · m, switchable to cN · m, lbf · ft or lbf · in (depending on model)
  • Power supply unit with Euro -Plug (UK, US, AUS adapter on request)
  • Scope of delivery: control display, display holder incl. Cable, software incl. PC connection cable

Package dimensions 16.0 x 12.2 x 9.1 inches

For testing, and verifying clockwise and anti-clockwise torque wrenches. 5 models in the range of 0.5 to 3150 N·m. Vertical and horizontal testing according to DIN EN ISO 6789. Electronic torque tester integrated with measurement electronics. Robust housing from aluminium cast with separate or detachable operating display. Serial interface RS232 for PC. Traceable to national standards. ETP 15 with integrated overload protection and tool for manual resetting after unintended overload. Torque reading precision /- 1 %, /- 1 digit from reading figure. Factory certificate based on VDI 2646. Optional certificate as per DAkkS-DKD-R 3-8. A large LC graphic display. Wide measuring range in N·m, can be switched to cN·m, lbf·ft or lbf·in (model dependant). Power supply unit with EURO plug (UK, US, AUS-adaptor on request). Accessories: Operating display, display holder incl. cable, software incl. connection cable for PC.

Brand: Gedore

Properties:

  • For calibration and certification of torque wrenches
  • The software guides you through the calibration based on DIN EN ISO 6789: 2003
    complete documentation of the creation of factory certificates
  • Manufacturer service for recalibration for short downtimes
  • Made in GERMANY

Binding: Tool

Release date: 17-03-2017

Details:

  • For testing, adjusting and certifying right-hand and left-hand torque wrenches
  • 5 models in the range from 0.5 to 3150 N · m 
  • Vertical or horizontal testing in accordance with DIN EN ISO 6789
  • Electronic test device with integrated measuring electronics
  • Stable base housing made of cast aluminum (except ETP 3150) with separate or removable operating display
  • RS232 serial interface for PC
  • Can be traced back to national standards
  • ETP 15 with overload protection and tool for manual reset after unwanted overload
  • Torque reading accuracy +/- 1%, +/- 1 digit of the reading value
  • Works certificate based on VDI 2646 • Optional certificate according to DAkkS-DKD-R 3-8
  • Large LC graphic display • Large measuring range in N · m, switchable to cN · m, lbf · ft or lbf · in (depending on model)
  • Power supply unit with Euro -Plug (UK, US, AUS adapter on request)
  • Scope of delivery: control display, display holder incl. Cable, software incl. PC connection cable

Package dimensions 16.0 x 12.2 x 9.1 inches

For testing, and verifying clockwise and anti-clockwise torque wrenches. 5 models in the range of 0.5 to 3150 N·m. Vertical and horizontal testing according to DIN EN ISO 6789. Electronic torque tester integrated with measurement electronics. Robust housing from aluminium cast with separate or detachable operating display. Serial interface RS232 for PC. Traceable to national standards. ETP 15 with integrated overload protection and tool for manual resetting after unintended overload. Torque reading precision /- 1 %, /- 1 digit from reading figure. Factory certificate based on VDI 2646. Optional certificate as per DAkkS-DKD-R 3-8. A large LC graphic display. Wide measuring range in N·m, can be switched to cN·m, lbf·ft or lbf·in (model dependant). Power supply unit with EURO plug (UK, US, AUS-adaptor on request). Accessories: Operating display, display holder incl. cable, software incl. connection cable for PC.