Gossen - Multimeter

Brand: Gossen Metrawatt

Characteristics:

• AC voltage measurement also "low resistance" (1 MΩ)
• Switchable 1 kHz / -3 dB low-pass filter
• TrueRMS bandwidth 10 kHz
• Direct current measurement 100 µA - 10 A (16 A)

Binding: electronics

Details:

• Display: ± 12,000 digits
• TRMS up to 10kHz
• 16 multimeter functions
• VACTRMS, VAC + DC TRMS, VDC
• Hz, resistance, continuity
• diode, AACTRMS
• AAC + DC TRMS
• precision temperature indicator for K thermocouples,
• additional filter function and low resistance Voltage measurement to limit interference, e.g. when taking measurements on frequency converters,
• acoustic / optical signals for: continuity test,
• voltages dangerous to touch,
• exceeding overload limits,
• storage of min / max values,
• new housing design,
• extra battery and fuse compartment
• housing made of impact-resistant plastic, large illuminated display
• 15mm digit height and analog bar graph
• 3 sockets with patented ABS socket lock
• water and dust proof IP52
• measurement category 1000V CAT III and 600V CAT IV according to IEC 61010-1 2nd edition,

scope of delivery: cable set, battery and DKD calibration certificate

Features

• * Display: analog / digital
• * Analog bar display: Yes
• * Multiple display: Yes
• * Measuring range selection: manual / autom atic
• * Max. voltage measuring range AC: 1000 V
• * Lowest resolution alternating voltage: 1 mV
• * Max. voltage measuring range DC: 1000 V
• * Lowest resolution direct voltage: 100 mV
• * Max. current measuring range AC: 10 A
• * Lowest resolution alternating current: 100 µA
• * Max. current measuring range DC: 10 A
• * Smallest resolution direct current: 100 µA
• * Max. Resistance measuring range: 10 MOhm
• * Smallest resolution resistance: 0.01 Ohm
• * Temperature measurement: Yes
• * Capacitance measurement: No
• * Frequency measurement: Yes
• * Continuity test / diode test: Yes
• * Nominal test voltage 10 V: No
• * Nominal test voltage 50 V: No
• * Nominal test voltage 100 V: No
• * Nominal test voltage 250 V: No
• * Nominal test voltage 500 V: No
• * Nominal test voltage 1000 V: No
• * With level measurement (dB): No
• * Instantaneous value memory (data hold): Yes
• * Maximum value memory: Yes
• * Minimum value memory: Yes
• * True effective value measurement (TRMS): Yes
• * Duty cycle measurements: Yes
• * Measured value memory: No
• * ...