Megger MIT430-EN - Insulation measuring device | 1000V

Brand: Megger

Properties:

• Insulation measuring device 1000 V, measuring range up to 200 GOhm, test voltages: 150 V, 100 V, 250 V, 500 V, 1000 V DC, continuity test up to 99 Ohm (with 20 or 200 mA test current), resistance range up to 1 MOhm, leakage current up to 2000 µA , Test modes: PI, DAR
• Test modes: PI and DAR - test lead compensation - acoustic display 1 - 20 ohm - limit value display - with measured value memory and Bluetooth interface
• Test modes: PI and DAR - test lead compensation - acoustic display 1 - 20 ohm - limit value display - with measured value memory and Bluetooth interface

Product description: The best tester in Megger's MIT400-2 series, the MIT430/2 includes absolutely every test you'll need for testing insulation, plus other associated electrical parameters.

This model is the only tester in the Megger MIT400-2 series to include fully downloadable memory. This means you can store all testing results directly on the tester, then use the Bluetooth download facility to wirelessly send this data to a compatible PC for further analysis. All tests are downloaded directly to a CSV file, allowing them to be opened using Microsoft Excel or equivalent (no Megger software required!). 

Megger's MIT340-2 is suitable for practically any insulation measurement. With selectable test voltages of 50, 100, 250, 500 and 1000V plus polarisation index and dielectric absorption ratio measurement modes, you can use this tester for checking insulation in electrical installations, cables, motors, automotive applications and much more.

A wide variety of additional testing procedures are also available on the MIT430/2; these include continuity with automatic reverse polarity, voltage measurements to 600V (AC/DC) and capacitance measurements from 0.1nF to 10μF.

Key features:

• Selectable insulation test voltages of 50, 100, 250, 500 and 1000V
• Polarisation index (PI) and dielectric absorption ratio (DAR) measurements
• Variable test voltage from 10V to 1000V
• 2% test voltage accuracy
• PASS/FAIL indication
• Stabilised test voltage - feedback controlled to ensure it remains within specification throughout full range
• Test voltage display alongside measurements
• Analogue arc display replicates response of a moving coil display
• Timed testing - automatically test to a time limit
• Insulation testing up to 200GΩ (at 1000V)
• High quality flexible silicone testleads prevent measurement errors on GΩ ranges
• Test inhibit - prevents testing if voltages in excess of 25, 30, 50, 75 ot 100V (set by yser) are detected
• Insulation buzzer - can be set to buzz if the insulation resistance is above a user-adjustable limit
• Test lock - holds insulation test on continuously
• Continuity test with automatic range from 0.01Ω to 1.0MΩ
• 200mA or 20mA continuity tests available
• Voltage measurements up to 600V AC/DC
• Automatic display of frequency during voltage measurements
• Weatherproof with IP54 casing
• Bluetooth download and built-in memory storage
• CAT IV 600V safety rated

Package includes:

• Megger MIT340-2 Insulation Tester
• Red/Black Silicone Test Leads with Probes and Clips
• SP5 Remote Switch Probe
• User Guide CD
• 6 x NiMH Rechargeable Batteries
• Hard Carrying Case

Package dimensions: 16.5 x 10.9 x 4.4 inches