PeakTech 1650 - True RMS Current Clamp

Brand: PeakTech

Characteristics:

• PROFESSIONAL DEVICE: The P 1650 digital clamp meter from PeakTech enables the inductive and non-contact measurement of currents. Hand protection against accidental contact with the pliers provides security
• MEASURING METHODS: In addition to measuring AC / DC voltage and current up to 600 volts, the device also allows resistance, frequency, capacitance and temperature measurements as well as diode tests and continuity tests
• HOLD FUNCTION: The measured value can be frozen in the LCD display with the HOLD key. To exit the HOLD function, press the HOLD key again and the device continues to measure
• LCD DISPLAY: The high-quality clamp meter with illuminated display has a 3 ¾ digit LCD screen with 12 mm digits. Protection class: CAT III 600 V - device suitable for electricians
• INFO: Safety: EN 61010-1; Backlight; 3999 counts; Accessories: Type K temperature sensor, bag, test leads, battery and operating instructions; Dimensions: 70 x 197 x 40 mm, weight: 190 grams

Release date: 06-11-2016

Details: Digital clamp meter, 4000 counts, 400 A AC / DC current clamps are ideally suited for current measurement in electrical systems and control cabinets, since only single wires are passed through the clamp jaws for non-contact current measurement and no electrical connections have to be separated. This method also enables measurements of very high currents which, if connected directly, would overload any commercially available multimeter. In addition, this model has extensive multimeter functions for voltage, resistance, frequency, capacitance and temperature measurement. Continuity tests with acoustic signals and diode tests can also be carried out. This means that it is no longer necessary to carry additional measuring devices with you when working in the field. In addition, this measuring device comes with extensive accessories such as test leads, the required battery or a carrying case, so that the user can start working immediately. Special protection is created by the stable, non-slip and fire-retardant plastic housing, which is provided with a sprayed-on rubber coating. This clamp meter carries out measurements as a true RMS value (real effective value) and, due to its high functionality and easy handling, is suitable for electronics specialists as well as for service technicians or hobby users. 3 3/4 digit, 12 mm LCD display; max.display: 3999, 41-segment analog bar graph True RMS (true effective value measurement) Automatic range selection Peak value hold function Measured value hold function Backlighting Non-contact voltage detector AC / DC current: up to 400 A Voltage measurement up to 600 V AC / DC Resistance, frequency, Capacity and temperature measurement function Diode test and continuity test function Automatic switch-off Conductor diameter: max. 30 mm Safety: TÜV / GS; EN 61010-1; CAT III 600 V Accessories: Type K temperature sensor, bag, test leads, battery and operating instructions DCV: 400 mV / 4/40/400/600 V; ± 1.5% + 2 St. ACV: 400 mV / 4/40/400/600 V; ± 1.0% + 10 St. DCA: 40/400 A; ± 2.5% + 5 St. ACA: 40/400 A; ± 2.5% + 8 St. Ohm: 400 Ω / 4/40/400 kΩ / 4/40 MΩ; ± 1.5% + 2 St. cap .: 40 nF - 4 mF; ± 3.0% + 5 St. Freq .: 10 Hz - 100 kHz; ± 1.5% + 2 hour temp .: -20 ... + 760 ° C; ± 3.0% + 5 pieces Dimensions: 70 x 197 x 40 mm Weight: 190 g

Package dimensions: 8.8 x 4.6 x 2.7 inches