RIGOL DP800 - Series Programmable Linear Dc Power Supply | 195W 30V/3A || 30V/3A, 5V/3A
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

RIGOL DP800 - Series Programmable Linear Dc Power Supply | 195W 30V/3A || 30V/3A, 5V/3A

Available: Out of Stock
€504,00

Brand: Rigol

Properties:

  • Power Supply with 2 0-30V/3A channels, 1 5V/3A channel, and 10 mV/10 mA measurement resolution
  • DP832 laboratory power supply number of outputs 3 x 0 - 30 V / DC / 0 - 3 A 0 - 30 V / DC / 0 - 3 A 0 V / DC - 5 V / 0 - 3 A power 195 W

Binding: Elektronics

Key features:

  • Three outputs – Controlled independently
  • Low ripple and noise
  • Excellent load regulation and line regulation
  • Fast transient response time <50μs
  • Over-voltage and over-current protection
  • Over-temperature protection
  • Fan failure check and alarm>
  • 3.5″ TFT display 
  • Built-in V/A/W measurements and waveform display
  • Built-in Help system
  • Delay on/off function & toggle on/off function
  • Built-in recorder logs output state
  • Self-test and manual calibration functions
  • Supports SCPI command set for remote control
  • Connectivity… USB Host & Device

Details: The DP832 Model is a 195 W, 3 channel linear power supply, with very low noise and 2 isolated channels. All 3 channels are independently adjustable. A 3.5 "display, as well as built-in V, A, W measuring options, making it essential for any laboratory. USB control and IO control are standard.

Technical data:

  • Number of outputs: 3 x
  • Output voltage (max.) : 30 V / DC
  • Output voltage (min.): 0 V / DC
  • Output voltage 2 (max.): 30 V / DC
  • Output voltage 2 (min.): 0 V / DC
  • Output voltage 3 (max. ): 5 V
  • Output voltage 3 (min.): 0 V / DC
  • Output current (max.): 3 A
  • Output current (min.): 0 A
  • Output current 2 (max.): 3 A
  • Output current 2 (min.): 0 A
  • Output current 3 (max.): 3 A
  • Output current 3 (min.): 0 A
  • Weight: 10.5 kg
  • Calibrated according to: factory standard (without certificate)
  • Laboratory power supply type (categorization): laboratory power supply, adjustable
  • Power: 195 W
  • Power connection: IEC 320 C14
  • Product dimensions, width: 239 mm Product dimensions, height: 157 mm
  • Product dimensions
  • Length: 418 mm Change- type 50-3
  • Cable manufacturer: linear control Power supply.

Note: The latest drivers an d software versions can be downloaded from the manufacturer's website for free.

Package dimensions: 21.8 x 15.0 x 12.2 inches

DP800 series includes single output, two output and three output programmable linear DC power supply. They have pure output, excellent performance indicators, multiple analysis functions, rich interfaces, and can meet the diverse testing needs.

Ultra low noise design to meet the user's demand for high purity power supply.

The response time of the power supply shall not exceed 50uS, so as to meet the user's demand for rapidly changing voltage waveform.

When the timer is on, the instrument will output preset voltage and current (up to 2048 groups). The user can set the number of output groups of the timer, and set the output voltage, current and timing time of each group. (take dp831a as an example).

Real time measurement and display the change trend of V / A / W parameters at the same time. (take dp831a as an example).

It has the functions of output analysis, monitoring, setting preset, etc. to realize all-round monitoring analysis (take dp831a as an example).

Traditional numerical interface and instrument panel interface can be switched, easy to operate, intuitive and clear.

 

Brand: Rigol

Properties:

  • Power Supply with 2 0-30V/3A channels, 1 5V/3A channel, and 10 mV/10 mA measurement resolution
  • DP832 laboratory power supply number of outputs 3 x 0 - 30 V / DC / 0 - 3 A 0 - 30 V / DC / 0 - 3 A 0 V / DC - 5 V / 0 - 3 A power 195 W

Binding: Elektronics

Key features:

  • Three outputs – Controlled independently
  • Low ripple and noise
  • Excellent load regulation and line regulation
  • Fast transient response time <50μs
  • Over-voltage and over-current protection
  • Over-temperature protection
  • Fan failure check and alarm>
  • 3.5″ TFT display 
  • Built-in V/A/W measurements and waveform display
  • Built-in Help system
  • Delay on/off function & toggle on/off function
  • Built-in recorder logs output state
  • Self-test and manual calibration functions
  • Supports SCPI command set for remote control
  • Connectivity… USB Host & Device

Details: The DP832 Model is a 195 W, 3 channel linear power supply, with very low noise and 2 isolated channels. All 3 channels are independently adjustable. A 3.5 "display, as well as built-in V, A, W measuring options, making it essential for any laboratory. USB control and IO control are standard.

Technical data:

  • Number of outputs: 3 x
  • Output voltage (max.) : 30 V / DC
  • Output voltage (min.): 0 V / DC
  • Output voltage 2 (max.): 30 V / DC
  • Output voltage 2 (min.): 0 V / DC
  • Output voltage 3 (max. ): 5 V
  • Output voltage 3 (min.): 0 V / DC
  • Output current (max.): 3 A
  • Output current (min.): 0 A
  • Output current 2 (max.): 3 A
  • Output current 2 (min.): 0 A
  • Output current 3 (max.): 3 A
  • Output current 3 (min.): 0 A
  • Weight: 10.5 kg
  • Calibrated according to: factory standard (without certificate)
  • Laboratory power supply type (categorization): laboratory power supply, adjustable
  • Power: 195 W
  • Power connection: IEC 320 C14
  • Product dimensions, width: 239 mm Product dimensions, height: 157 mm
  • Product dimensions
  • Length: 418 mm Change- type 50-3
  • Cable manufacturer: linear control Power supply.

Note: The latest drivers an d software versions can be downloaded from the manufacturer's website for free.

Package dimensions: 21.8 x 15.0 x 12.2 inches

DP800 series includes single output, two output and three output programmable linear DC power supply. They have pure output, excellent performance indicators, multiple analysis functions, rich interfaces, and can meet the diverse testing needs.

Ultra low noise design to meet the user's demand for high purity power supply.

The response time of the power supply shall not exceed 50uS, so as to meet the user's demand for rapidly changing voltage waveform.

When the timer is on, the instrument will output preset voltage and current (up to 2048 groups). The user can set the number of output groups of the timer, and set the output voltage, current and timing time of each group. (take dp831a as an example).

Real time measurement and display the change trend of V / A / W parameters at the same time. (take dp831a as an example).

It has the functions of output analysis, monitoring, setting preset, etc. to realize all-round monitoring analysis (take dp831a as an example).

Traditional numerical interface and instrument panel interface can be switched, easy to operate, intuitive and clear.